658 Ohio Street
Buffalo, NY 14203
800.836.2580 / 716.849.4760
Rigidized® Metals offers all standard mill produced finishes for both textured and non-textured distribution, as well as specialty polished and embossed finishes. Beautiful finishes on stainless steel are produced by hand to create our Random Swirl and Non-Directional products. Sand-Tex, Linen and Squares finishes are produced by embossing or "coining" fine texture on the face of stainless steel sheets.
1.CS® |
1.HM® |
1.HR® |
1.NA® |
1.RL® |
1.SLG® |
1.UN |
2.FL® |
2.WL® |
3.ND® |
4.LB® |
5.HR |
5.WL® |
6.HC® |
6.SL® |
6.WL® |
60.LTH® |
7.DL |
LINEN BA |
SANDTEX BA |
SQUARES BA |
RSS.3 |
RTP® |
STP® |
XTP |
The table below lists our patterns by sheet width. Our standard lengths are 96", 120" and 144". Please phone customer service for specific finish, pattern specifications, technical information and free samples. Please note the following for indicated patterns:
* Maximum length 96"
** 6.HC is also available at .125" thickness in stainless steel sheets up to 36" wide
*** 7.DL is available in 48" x 120" sheets only.
| Image |
Pattern | Width | Stainless Steel Thickness | Other Metal Thickness |
|
|
1.CS® [1CS, 1-CS] |
36" | 0.018"-0.075" | 0.010"-0.080" |
|
|
1.HM® [1HM, 1-HM] |
36" |
0.018"-0.036" | 0.010"-0.040" |
|
|
1.HR® [1HR 1-HR] |
48" |
0.048"-0.060" | 0.048"-0.062" |
|
|
1.NA® [1NA, 1-NA] |
48" |
0.018"-0.075" | 0.010"-0.090" |
|
|
1.RL® [1RL, 1-RL] |
48" | 0.018"-0.120" | 0.018"-0.125" |
|
|
1.SLG® [1SLG, 1-SLG] |
48" | 0.010"-0.048" | 0.010"-0.060" |
|
|
1.UN [1UN, 1-UN] |
48" | 0.018"-0.120" | 0.018"-0.125" |
|
|
2.FL® [2FL, 2-FL] |
48" | 0.024"-0.120" | 0.020"-0.125" |
|
|
2.WL® [2WL, 2-WL] |
48" | 0.018"-0.036" | 0.008"-0.032" |
|
|
3.ND® [3ND, 3-ND] |
48" |
0.018"-0.036" | 0.024"-0.040" |
|
|
4.LB® [4LB, 4-LB] |
48" | 0.018"-0.060" | 0.010"-0.090" |
|
|
5.HR[5HR, 5-HR] | 48" | 0.024"-0.060" | 0.025"-0.062" |
|
|
5.WL®[5WL, 5-WL] | 60" | 0.018"-0.090" | 0.008"-0.090" |
|
|
6.WL®[6WL, 6-WL] | 60" |
0.018"-0.125" | 0.008"-0.125" |
|
|
6.HC®[6HC, 6-HC] | 48" |
0.024"-0.105" / |
0.024"-0.105" |
|
|
6.SL®[6SL, 6-SL] | 48" |
0.018"-0.060" | 0.024"-0.125" |
|
|
60.LTH® [60LTH, 6-LTH] |
60" | 0.018"-0.075" | 0.010"-0.090" |
|
|
7.DL [7DL, 7-DL] | 48" |
0.036"/0.060"/.075" | N/A |
|
|
LINEN | 48" | consult factory | consult factory |
|
|
SANDTEX | 48" | consult factory | consult factory |
|
|
SQUARES | 48" | consult factory | consult factory |
|
|
RSS.3 | 60" | 0.029"-0.120" | 0.036"-0.125" |
|
|
RTP® | 60" | 0.018"-0.120" | 0.010"-0.125" |
|
|
STP® | 48" | 0.075"-0.105" | 0.080"-0.100" |
|
|
XTP | 48" | 0.024"-0.075" | 0.024"-0.080" |
|
3.QLT | 48" | 0.024"-0.029" | 0.024"-0.032" |
|
Squares | 44" |
0.029"-0.036" | 0.029"-0.040" |
|
Diagonal | 45" |
0.029"-0.036" | 0.029"-0.040" |
|
Checkerboard | 44" |
0.029"-0.036" | 0.029"-0.040" |
|
Harlequin | 45" |
0.029"-0.036" | 0.029"-0.040" |
|
Diamond | 45" |
0.029"-0.036" | 0.029"-0.040" |
|
Mosaic | 45" |
0.029"-0.036" | 0.029"-0.040" |
© Rigidized Metals Corporation
Manufacturers of Custom Textured Metals and Architectural Components